CE-245 Electric Drive and Lighting Installation Trainer
• This trainer is designed to meet the operation training of typical electrician maintenance circuit, covering
a wide training range for electric traction and domestic lighting control technologies.
• The training platform is built up in way of door type mobile cabinet, with two detachable grid walls
on each face to realize double sided training function.
• The electrical control components are installed on the grid walls, using a separated terminal block
to ensure convenient and safe circuit wiring. Necessary measuring meter and button switch are
fixed on the lockable door to simulate a real control panel but saving space at the same time.
• Leakage and overcurrent protection devices are adopted to cut off the main power supply automatically
when leakage, short circuit or overload happens.
> TRAINING CONTENT
Electric Drive
• Three phase asynchronous motor direct starting control
• Three phase asynchronous motor contactor jog control
• Three phase asynchronous motor contactor self-locking control
• Manual reduced voltage starting control of three phase asynchronous motor stator series resistance
• Automatic reduced voltage starting control of three phase asynchronous motor stator series resistance
• Automatic Y/starting control
• Contactor interlocked three phase asynchronous motor forward and reverse control
• Button interlocked three phase asynchronous motor contactor forward and reverse control
• Double-interlocked three phase asynchronous motor forward and reverse control
• Three phase asynchronous motor unidirectional reduced voltage starting and reverse braking control
• Three phase asynchronous motor dynamic braking control
• Three phase asynchronous motor sequential control
• Three phase asynchronous motor remote and local control
• Jog starting control of three phase asynchronous motor forward and reverse
• Work table automatic round trip control
• Work table automatic jog round trip control
• X62W type universal milling machine spindle and feed motor gang control
• C620 lathe control circuit
• Electric block electrical control circuit
• Unidirectional motor starting control
Lighting Control
• Incandescent light control circuit
• Fluorescent lamp control circuit
• Touch switch controlled incandescent light control circuit
• Voice operated switch controlled incandescent light control circuit
• Single phase kilowatt hour meter installation circuit
• Installation of three phase-four-wire active kilowatt hour meter
• Installation of three phase-four-wire reactive kilowatt hour meter
• Voltmeter and ammeter installation circuit
• Wiring circuit of using universal change-over switch and voltmeter to measure three phase line voltage
• One current transformer used single loop wiring circuit
• Two current transformers connected incomplete star connection circuit
• Three current transformers connected star connection circuit
• Two current transformers differential connected wiring circuit
• Three current transformers connected delta connection circuit
>CONFIGURATION
1. Mobile cabinet
- Stamped holes on four sides for heat emission
- Complete powder coated sheet steel of 2mm thickness
- Rotary type sheltered lock on both sides
- Centralized terminal distribution block on electric drive side
- CEE concealed type socket mounted on side face
- Thicken base plate for motor installation
- Two groups of upper and lower type grid walls
Area 700*710mm, hole size 5*15mm
- 4 swiveling casters, 2 of which have brakes
- Dimensions: 860mm*620mm*1835mm (approx.)
2. On door control panel
- Current meter range 0…10A, 3 units
- Voltage meter range 0…450V
- Change over switch
- Indicator lamps, red / green, AC6.3V / 24V / 220V
- Rotary selective switch x2
- Button switch red / yellow / green, 2 each
- Signboard x16
3. Electric drive panel (I)
- MCCB (4P, 16A), Ui 800V, Ii 400A, IEC60947-2
MCB (3P, 10A), IEC60898-1
- Active energy meter, mechanical
- Reactive energy meter, mechanical
- Ceramic fuse protector with holder x5
- Rectifier bridge
- Current transformer 10/5A, 3 - turn, 3 units
- Control transformer, IN220/380V, OUT110/36/24/6.3V
- Rheostat 50W/100Ωx3
- Guide rail, terminal blocks, wiring duct, forked cable, etc.
4. Electric drive panel (II)
- Time relay 0…10s, AC110V with seat, 2 units
- AC contactor AC110V, 4 units
- Limit switch Ui250V, Ith5A, IEC/EN 60947-5-1, 6units
- Electromagnetic intermediate relay, 2 units
- AC intermediate relay, 2 units
- Thermal overload relay, 2units
- Terminal blocks, wiring duct, forked cable, etc.
5. Lighting control panel (I)
- RCCB (2P, 20A), I30mA, GB/T16916.1
- Single phase energy meter, mechanical
- Ceramic fuse protector with holder x2
- SPDT switch
- Lamp red / green / yellow with seat x6
- Terminal blocks, wiring duct, forked cable, etc.
6. Lighting control panel (II)
- Fluorescent tube 450mm, with holder
- Ballast
- Starter
- Combined power socket
- Touch delay lamp switch
- Sound/Light delay lamp switch
- Double control switch box, 2 units
- Fan motor, H/M/L speed with capacitor
- Terminal blocks, wiring duct, forked cable, etc.
7. Accessories
- Three phase asynchronous motor, Y/, 1400r/min, 0.4A
- Three phase asynchronous motor, Y/ 1400r/min, 0.69A, with centrifugal switch
- Motor cable: conductor cross section: 2.5mm2 , one head axial socket (banana), one head forked type
- Wiring cable: BV type red / yellow / green, 50m each, RV type black 100m.
- Tools: nipper pliers, wire stripper, cross screwdriver, etc.
Note
- All specifications subject to change without notice
> LEADING TIME
| Quantity (sets) |
1 - 20 |
>20 |
| Time (days) |
35 |
To be negotiated |
> FAQ
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from MIC, your order and money will be well guaranteed.
3.How can I know how my order is being done?
A:We will inspect and test all items in order to avoid damage and missing parts before shipping. The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.
4.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service. For the overseas orders, we guarantee most accessories. Provided emails with details including pictures or short video, we will send guide manual or replacements at our cost to repair.
5: Are you trading company or manufacturer?
A: We are factory. We are specialized for vocational training equipment 7 years in China.
6: How long is your delivery time?
A: Generally, it is 10-15 days if the goods are in stock. Or it is 30-50 days if the goods are not in stock, it is according to
quantity.
7: Do you provide OEM & ODM services?
A: Yes, we can do according to your requirement.
> CASE
Audited Supplier 
){kind=link}