CAM-001 Automatic Modular Flexible Production Training System (With Robot)
CAM-001M is a comprehensive modular production training and simulation system. It has the following advantages:
(1) Multi-fuctions.
• The PLC unit can not only be used for the logic control of modular station but also be taken out as an independent unit for external programming application.
(2) Easy to operate.
• Its components reach the industrial level.
• Modular design. The complete unit is movable and lockable.
(3) Its modular stations and technologies can support various research on automation industrial production.
• It has nine modular stations: monitoring & feeding, detection & waste rejection, handling, processing, simulated heat treatment & marking, buffering, transfering, assembly and stereoscopic storage.
• It applies various technologies: mechanical & electrical & electronic & information & sensor & interface technologies, etc.
| HMI Monitoring Control and Feeding Unit |
Assembly Unit |
Handling Unit |
| Simulated Heat Treatment & Marking Unit |
Stereoscopic Storage Unit |
Buffering Unit |
| Manipulator Transfering Unit/Six Freedom Robot Handling Unit |
Detection & Waste Rejection Unit |
Processing Unit |
| Air compressor |
Accessories |
Manual |
1. HMI Monitoring Control and Feeding Unit
• SIMATIC HMI SMART 700 IE V3
• Metal column for heat treatment and marking process
• Waste column for rejecting process
• 24V DC vertical alarming light with four colors
• Portable programmable logic controller unit
2. Detection & Waste Rejection Unit
• Conveyor belt mechanism, sensors
• Reflective sensor for workpiece arrival detection
• Sliding slot for waste workpiece storage
• Portable programmable logic controller unit
3. Handling Unit
• Guide rod cylinder #1 with magnet switches and throttle valves
• Guide rod cylinder #2 with magnet switches and throttle valves
• Rotary cylinder with magnet switches and throttle valves
• Portable programmable logic controller unit
4. Processing Unit
• Six-position rotary disc & stepping motor & driver mechanism
• Laser sensor for workpiece entrance detection
• Metal sensor for rotary disc positioning
• Color sensor for drilling #1 detection
• Portable programmable logic controller unit
5. Simulated Heat Treatment & Marking Unit
• Laser sensor for workpiece entrance detection
• Laser sensor for workpiece arrival detection
• Laser sensor for workpiece export detection
• Portable programmable logic controller unit
6. Buffering Unit
• 5/2 way single solenoid valve
• Optical fiber and metal sensors for workpiece export detection
• Biaxial cylinder #1 with magnet switches for stopping
• Portable programmable logic controller unit
7. Six Freedom Robot Handling Unit
• Robot
• Pneumatic gripper with magnet switches and throttle valves
• 5/2 way double solenoid valve x1 with bus bar
• Portable programmable logic controller unit
8. Assembly Unit
• Optical fiber and metal sensors for workpiece export detection
• Charging barrel #1 & compact cylinder with throttle valves
• Laser sensor #1 for workpiece unloading detection
• Portable programmable logic controller unit
9. Stereoscopic Storage Unit
• Guide rod cylinder & pneumatic gripper
• Ball screw
• Operating panel: start / stop / reset / emergency
• 5/2 way single solenoid valve
• 5/2 way double solenoid valve
• Portable programmable logic controller unit
(1) Mechanical Structure Application
• Biaxial cylinder and guide slot formed single workpiece feeding mechanism
• DC gear motor and conveyer belt formed transfer mechanism
• Rotary cylinder and pneumatic gripper formed manipulator handling mechanism
• Stepping motor and graduator formed intermittent motion mechanism
• Biaxial cylinder and DC motor formed simulated drilling and marking mechanism
• Synchronous belt and pneumatic gripper formed reciprocating handling mechanism
• Conveyor and two biaxial cylinder formed workpiece buffering mechanism
• Robot arm related multiple position handling
• Biaxial cylinder and compact cylinder formed single workpiece blanking mechanism
• Two-axis lead screw and manipulator formed automatic stereoscopic warehouse workpiece placement
• Sensor and warehouse formed data feedback mechanism
(2) Pneumatic Structure Application
• Cylinder: pneumatic actuator
• Bus board: air source distribution for solenoid valve
• Solenoid valve: for electrical control of mechanical mechanism
• Throttle valve speed control: for air flow control
• Filter: pressure control and water filtration
• Air compressor: air pressure generator
(3) Electrical Control Application
• Siemens S7-200 programmable logic controller system
• Sensors: magnet sensor, optical fiber sensor, reflective sensor, analog sensor, photoelectric sensor, laser sensor, color mark sensor, metal sensor, limit switch, limit groove type sensor, micro switch, etc.
• Power supply and operating panel
• Controller module, interface module, indicators, etc.
(4) Programming Application
• Sequential structure, selective structure and cycle structure
• Switching value realized cylinder motion control, gear motor control, indicator control
• Pulse value realized stepping motor control, servo motor control
• Analog value realized sensor data reception, SCR conduction angle control
• Robot motion programming
• Fieldbus realized data exchange
• Human machine interface measurement and control
| By Express |
By Air |
By Sea |
Others |
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from MADE IN CHINA, your order and money will be well guaranteed.
3.How can I know how my order is being done?
A:We will inspect and test all items in order to avoid damage and missing parts before shipping. The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.
4.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service. For the overseas orders, we guarantee most accessories. Provided emails with details including pictures or short video, we will send guide manual or replacements at our cost to repair.
5: Are you trading company or manufacturer?
A: We are factory. We are specialized for vocational training equipment 7 years in China.
6: How long is your delivery time?
A: Generally, it is 10-15 days if the goods are in stock. Or it is 30-50 days if the goods are not in stock, it is according to
quantity.
7: Do you provide OEM & ODM services?
A: Yes, we can do according to your requirement.
https://choieo-education.en.made-in-china.com/product-list-1.html
https://choieo-education.en.made-in-china.com/contact-info.html
){kind=link}