CAG-001 Mechatronics Training System (10-station)
• This is a comprehensive mechatronic training and simulation system, it offers a complete solution for the study of modern factory automation and integrates a variety of technological applications, including mechanical & electrical & electronic & information & sensor & interface technologies, etc.
• Industrial grade components and control methods are used to fully demonstrate the factory production line system, up to ten stations are built on the platform, including HMI monitoring unit, feeding unit, drilling unit, deburring unit, rejecting unit, marking unit, assembly unit, triaxial handling unit, transfer unit, horizontal & biaxial storage and retrieval unit.
• The input and output signal cables of each actuator are led to serial ports, at the same time, all the power lines are gathered on one seat, by this way to achieve quick connection of the whole system and ensure the safe pluggable ability for practical operation.
• When the serial ports of controller panel and I/O panel are connected, user can upload the standard programs to run the system process directly for demonstration purpose without further operation. When conducting the independent design and programming training, by disconnecting the serial
port to achieve an open control mode, all wiring can be done through the 4mm safety sockets with pluggable cables.
• The experiment panel adopts modular design, coming with standard height that can easily be inserted into the frame area. The complete unit is movable and lockable, with complete aluminium profile structure.
Mechanical Structure Application
• Speed regulated vertical motion of brushless motor with ball screw
• Horizontal motion of servo motor with dual-rail ball screw
• Four direction & 180 degree & clamping motion of guide rod cylinder / rotary cylinder / gripper combination
• Biaxial cylinder and guide slot formed material blanking mechanism
• AC motor and conveyer belt formed speed regulated transfer mechanism
• Stepping motor and limit component formed material positioning mechanism
• Servo motor, ball screw, stepping motor and synchronous belt guide rail formed cantilever type carrier
Pneumatic Structure Application
• Bus board
• Cylinder
• Solenoid valve
• Direction control
• Speed control
• Sequence control
Electrical Control Application
• System I/O, digital quantity, high speed quantity, analog quantity, communication data quantity
• Monitoring frame HMI with slave computer formed Ethernet TCP/IP communication
• Master PLC and slave PLC formed RS485 user-defined protocol communication
• Master PLC and data acquisition module formed RS485 MODBUS RTU communication
• Extension of digital quantity, analog quantity and communication port
• Limit sensor, photoelectric sensor, fiber optic sensor, metal sensor, magnetic sensor and color mark sensor
• Power supply module, controller module and interface module
Programming Application
• Sequential structure, selective structure and cycle structure
• Switching value realized cylinder motion control, DC motor control, conveyor start/stop control, indicator control
• Pulse value realized stepping motor control, servo motor control
• Analog value realized color mark sensor data reception, DC brushless motor control
• Communication data value realized signal reception of data acquisition module
1. Mobile table |
2. Feeding unit |
3. Drilling unit |
4. Deburring unit |
5. Rejecting unit |
6. Marking unit |
7. Assembly unit |
8. Transfer unit |
9.Horizontal & biaxial storage and retrieval unit |
10. Triaxial handling unit |
11. HMI monitoring unit |
12. ADY-001 Power supply module |
13. APM-001 Processing, handling & assembly control module |
14. APM-002 Storage control module |
15. AIO-001 Input & Output interface module (I) |
16. AIO-002 Input & Output interface module (II) |
17. Air compressor |
18. Accessories |
18. Accessories
- 4mm Safety connecting cables
- Serial connecting cables
- Circular connecting cables
- Air tubes
- Programming cable
- Programming software
- Tools kit: socket head wrench, nipper pliers, wire stripper, crimping pliers, cross
screwdriver, straight screwdriver, diagonal pliers, clock screwdriver, multimeter, etc.
- Experiment guidebook
> CUSTOMIZATION
We support: logo customization(Min. order 2 set)
> Port: Ningbo, Shanghai, or any ports in China
Quantity (sets) |
1 - 10 |
>10 |
Time (days) |
Within 35 Working Days |
To be negotiated |
Wenzhou Choieo Education Technology Co., Ltd. was established on January 22, 2019, with its registered address located in Heyi Village, Oubei Street, Yongjia County, Wenzhou City, Zhejiang Province (within Zhejiang Weifeng Machinery Co., LTD.).
Its business scope includes research and development, installation and sales of education software; Design, development, and installation of teaching equipment, teaching instruments, teaching models, teaching training equipment, laboratory equipment, instruments, and meters, professional skill appraisal equipment, intelligent manufacturing training equipment; Hardware products, metal products, low-voltage electrical equipment, office equipment, mechanical equipment, computer software, and hardware research and development; Import and export of goods and technologies.
The company set independent production and import and export trade in one, specializing in vocational and technical education equipment export. The company has a young team, good technical reserves, and long-term customer resources.
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from MIC, your order and money will be well guaranteed.
3.How can I know how my order is being done?
A:We will inspect and test all items in order to avoid damage and missing parts before shipping. The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.
4.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service. For the overseas orders, we guarantee most accessories. Provided emails with details including pictures or short video, we will send guide manual or replacements at our cost to repair.
5: Are you trading company or manufacturer?
A: We are factory. We are specialized for vocational training equipment 7 years in China.
6: How long is your delivery time?
A: Generally, it is 10-15 days if the goods are in stock. Or it is 30-50 days if the goods are not in stock, it is according to
quantity.
7: Do you provide OEM & ODM services?
A: Yes, we can do according to your requirement.